May 19, 2021 19:12
3 yrs ago
13 viewers *
английский term
main vehicle connector
английский => русский
Техника
zzz Другая тематика zzz
Косилка компании Briggs & Stratton
Via terminal 5 (Red/White wire) of the main vehicle connector, the ECM provides 5 volts power to the throttle pedal or lever on the equipment or vehicle.
Back probe terminal 7 (Violet wire) at the *main vehicle connector*.
Check vehicle or equipment side for problems.
Inpspect EFI wire harness between the main vehicle connector and terminal E3 (Violet wire) at ECM connector.
Main Vehicle Connector
Back probe terminal 8 (Red wire) at the main vehicle connector.
Inpspect EFI wire harness between the main vehicle connector and terminal G1 (Yellow wire) at ECM connector.
Starting with the main vehicle connector and ending with the fuse/relay block, feed branches of new wire harness down through opening next to air block plate.
Connect main vehicle connector (B).
Starting on cylinder 1 side, and moving in a counter-clockwise direction around the engine, connect main vehicle connector (A).
On starter motor side of engine, press tab and disconnect main vehicle connector (A).
Starting on cylinder 1 side, and moving in a counter-clockwise direction around the engine, press tab and disconnect main vehicle connector (A), if connected.
Via terminal 5 (Red/White wire) of the main vehicle connector, the ECM provides 5 volts power to the throttle pedal or lever on the equipment or vehicle.
Back probe terminal 7 (Violet wire) at the *main vehicle connector*.
Check vehicle or equipment side for problems.
Inpspect EFI wire harness between the main vehicle connector and terminal E3 (Violet wire) at ECM connector.
Main Vehicle Connector
Back probe terminal 8 (Red wire) at the main vehicle connector.
Inpspect EFI wire harness between the main vehicle connector and terminal G1 (Yellow wire) at ECM connector.
Starting with the main vehicle connector and ending with the fuse/relay block, feed branches of new wire harness down through opening next to air block plate.
Connect main vehicle connector (B).
Starting on cylinder 1 side, and moving in a counter-clockwise direction around the engine, connect main vehicle connector (A).
On starter motor side of engine, press tab and disconnect main vehicle connector (A).
Starting on cylinder 1 side, and moving in a counter-clockwise direction around the engine, press tab and disconnect main vehicle connector (A), if connected.
Proposed translations
(русский)
3 | главный разъем системы электрооборудования (электросистемы) косилки | Alexander Konosov |
Proposed translations
27 мин
главный разъем системы электрооборудования (электросистемы) косилки
.
Something went wrong...