Pages in topic: [1 2] > | SDL Trados 2017 SR1 update failed and cancelled. Now no way to access the software! Thread poster: David Rumsey
| David Rumsey Canada Local time: 03:51 Member (2004) Swedish to English + ...
-> I was prompted to update my SDL Trados 2017 SR1 Freelance this morning. -> Halfway through the update, I received the error: Service "SDL Customer Feedback Service" (Sdl.Product.Telemetrics.v1 failed to start. Verify that you have sufficient privileges to start system services." -> I hit "Retry" twice but ultimately hit "Cancel". -> Now I cannot find ANY shortcut to Trados 2017 on the desktop nor a listing for it in the Control Panel. -> I read online that I was supp... See more -> I was prompted to update my SDL Trados 2017 SR1 Freelance this morning. -> Halfway through the update, I received the error: Service "SDL Customer Feedback Service" (Sdl.Product.Telemetrics.v1 failed to start. Verify that you have sufficient privileges to start system services." -> I hit "Retry" twice but ultimately hit "Cancel". -> Now I cannot find ANY shortcut to Trados 2017 on the desktop nor a listing for it in the Control Panel. -> I read online that I was supposed to adjust the Windows User Account Settings, which I have done, but I have no way to restart the program or installation?! -> I checked My Licenses on the SDL TRanslationZone.com page, but I don't see a link to return this license. I do NOT want to uninstall and reinstall the program if I cannot return the license first! ▲ Collapse | | | Samuel Murray Netherlands Local time: 11:51 Member (2006) English to Afrikaans + ... | Sylvie Pilon (X) Canada Local time: 06:51 English to French Same problem | Dec 12, 2018 |
I had the same problem this morning when I tried executing the latest Service Release for Studio 2017. After the error message about the Customer Feedback Service appeared, I canceled the update and Studio 2017 was gone. I downloaded it again from my SDL account, but I still get the error message when I try installing Trados Studio. I tried multiple solutions I found on the Web: I deactivated the Windows User Account Settings, I stopped my firewall temporarily, I right-clicked on t... See more I had the same problem this morning when I tried executing the latest Service Release for Studio 2017. After the error message about the Customer Feedback Service appeared, I canceled the update and Studio 2017 was gone. I downloaded it again from my SDL account, but I still get the error message when I try installing Trados Studio. I tried multiple solutions I found on the Web: I deactivated the Windows User Account Settings, I stopped my firewall temporarily, I right-clicked on the .exe file to run it as an administrator, I renamed certain files in the Telemetrics folder, I renamed the Telemetrics folder itself... Nothing works. The only thing I haven't tried yet is restarting my PC AFTER performing the above solutions and BEFORE running the installation again. I'll try that tonight, after I finish work. Luckily, I don't need Trados today, but still... What a hassle!
[Edited at 2018-12-12 19:41 GMT] ▲ Collapse | | | David Rumsey Canada Local time: 03:51 Member (2004) Swedish to English + ... TOPIC STARTER Still no luck | Dec 12, 2018 |
I adjusted my Windows User Account Settings to "Never" and downloaded the update again...but same error. ;-( | |
|
|
Marco Oberto Italy Local time: 11:51 Member (2003) English to Italian + ... invitation to upgrade to 2019 | Dec 12, 2018 |
David Rumsey wrote: I adjusted my Windows User Account Settings to "Never" and downloaded the update again...but same error. ;-( Could it be a gentle invitation to upgrade to Studio 2019? Luckily, I bought my upgrade a few months ago and today I was able to get rid of all problems created by those smart engineers in SDL! | | | David Rumsey Canada Local time: 03:51 Member (2004) Swedish to English + ... TOPIC STARTER
If that's the case, this isn't the way to install confidence in their products! | | | Sylvie Pilon (X) Canada Local time: 06:51 English to French Invitation? Hope not! | Dec 12, 2018 |
Marco Oberto wrote: Could it be a gentle invitation to upgrade to Studio 2019? Well, there's another thread in Proz's forums about people having problems updating their 2019 version of Studio, so I doubt this issue with Studio 2017 is an "invitation". And if it is, SDL will simply lose me as a client. | | | Alaa Zeineldine Egypt Local time: 12:51 Member (2002) English to Arabic + ... Same problem SDL suggested fix doesn't work | Dec 12, 2018 |
I have just experienced the same problem right now, and with an imminent delivery deadline. I found the info below in the SDL KB and tried Solution 2, but when I select Studio in the Control Panel, the only option available is to uninstall, which I will not attempt at this point. I will try Solution 1 next, but have to find out where the install file is downloaded first. It's not in the Downloads folder. The KB article is here: ... See more I have just experienced the same problem right now, and with an imminent delivery deadline. I found the info below in the SDL KB and tried Solution 2, but when I select Studio in the Control Panel, the only option available is to uninstall, which I will not attempt at this point. I will try Solution 1 next, but have to find out where the install file is downloaded first. It's not in the Downloads folder. The KB article is here: https://gateway.sdl.com/communityknowledge?articleName=000002554
[Edited at 2018-12-12 22:13 GMT] ▲ Collapse | |
|
|
Alaa Zeineldine Egypt Local time: 12:51 Member (2002) English to Arabic + ... | Sylvie Pilon (X) Canada Local time: 06:51 English to French
Alaa Zeineldine wrote: I found the solution in another thread in this forum, thanks to Lucyna Duleba. It worked for me too! Thank you so much! | | | Stepan Konev Russian Federation Local time: 13:51 English to Russian Going gray in minutes... | Dec 13, 2018 |
I hardly managed to get 2019 installed and activated yesterday. Now I decided to update 2017 on my second computer... Loads of thanks to Lucyna Duleba et al. --- Just minor addition: if SDL.Product.Telemetrics is not visible in the list of processes and you cannot rename the Telemetrics folder because it is allegedly used by another process (it was my case), reboot your computer in safe mode, rename the Telemetrics folder and restart again in normal mode. | | | Thomas Loob Estonia Local time: 11:51 Member English to Swedish + ...
First you report errors in the previous build here and total silence. Then comes an update and you think that: oh, now they have fixed the error with Multiterm not showing terms dynamically. And maybe the SDL icons are back on the menus. But no. Only the menu icons are back. What an accomplishment. Applause. I followed the instructions mentioned above and attemted to restart the computer in Safe Mode, but it started in normal mode and I had the option to commence the installati... See more First you report errors in the previous build here and total silence. Then comes an update and you think that: oh, now they have fixed the error with Multiterm not showing terms dynamically. And maybe the SDL icons are back on the menus. But no. Only the menu icons are back. What an accomplishment. Applause. I followed the instructions mentioned above and attemted to restart the computer in Safe Mode, but it started in normal mode and I had the option to commence the installation. It obviously installed SR1 but the termbase function is still gone. Applause. Brilliant. You pay hundreds of euros for smth that doesn't work and is met by total silence. The world needs more yellow vests.
[Redigerad 2018-12-13 09:06 GMT] ▲ Collapse | |
|
|
Thomas Loob Estonia Local time: 11:51 Member English to Swedish + ... Multiple crashes during work | Dec 13, 2018 |
Forgot to mention the multiple crashes that appeared after the last update some months ago. Thought they wouls also disappear with SR1, but the come even more often now. The timing with touting Studio 2019 is noticed.
[Redigerad 2018-12-13 11:42 GMT] | | | David Rumsey Canada Local time: 03:51 Member (2004) Swedish to English + ... TOPIC STARTER
When I worked in the software industry, there was a saying: "We deliver junk. But we deliver it on time."... | | | Marco Oberto Italy Local time: 11:51 Member (2003) English to Italian + ... deafening silence from SDL continues... | Dec 14, 2018 |
[quote]Thomas Loob wrote: First you report errors in the previous build here and total silence. You pay hundreds of euros for smth that doesn't work and is met by total silence. The world needs more yellow vests.
rad 2018-12-13 09:06 GMT] I find old bugs untouched in all new versions of Studio, no exception for 2019. The big novelty is now NOT to even bother to reply in public forums to their demanding users... | | | Pages in topic: [1 2] > | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » SDL Trados 2017 SR1 update failed and cancelled. Now no way to access the software! Wordfast Pro | Translation Memory Software for Any Platform
Exclusive discount for ProZ.com users!
Save over 13% when purchasing Wordfast Pro through ProZ.com. Wordfast is the world's #1 provider of platform-independent Translation Memory software. Consistently ranked the most user-friendly and highest value
Buy now! » |
| Protemos translation business management system | Create your account in minutes, and start working! 3-month trial for agencies, and free for freelancers!
The system lets you keep client/vendor database, with contacts and rates, manage projects and assign jobs to vendors, issue invoices, track payments, store and manage project files, generate business reports on turnover profit per client/manager etc.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |